Vcarve Post Installation

1. After you install Vcarve Pro, Click File - Open Application Data Folder

2. Find My_PostP folder and copy your post into this folder

3. Restart Vcarve Pro

4. Click Create a new file

5.Make sure you select Machine Bed and Button Left corner. Then Hit OK

6.When you ready to post code, select the post processor.

! STOP AND READ CAUTION !

Make sure your tool library is set up, verified, tools in CNC machine measured and performed a surface spoil board cut before trying any cut files.  Always use your simulation control and air cutting first to help verify your new post installation and configuration.  This post is for reference only and CNC Factory does not assume any responsibility for its accuracy or performance.  Only to be used and tested by an operator trained and familiar with running a CNC Factory machine.